Description
QUADRAJET 4MV CARBURETOR REPLACES ROCHESTER PART # 7040273
FOR 1970 PONTIAC
4 barrel Quadrajet with "FRONT/STRAIGHT GASOLINE INLET".
This is a direct replacement Quadrajet with all the same hook-ups as the stock Pontiac Carburetor
No modifications needed:
-
Bolts right on to your stock intake manifold.
-
Will accept the throttle linkage bracket from the original Quadrajet without any modifications, just transfer this bracket to your new carburetor.
-
Accepts the original gasoline line and vacuum hoses.
-
Uses the same service kit as your factory Quadrajet.
This Carburetor is set up for a "mechanical choke"
This type of choke is on your intake manifold and connects to the side of the carburetor with a rod
This carburetor was assembled using only the highest quality components, it features: All new parts and gaskets including , new choke pull-off, float, needle and seat , re-colored castings , brass bushings in the throttle shaft, re-finished base, yellow zinc plating on linkages and hardware,casting plugs are sealed with epoxy to prevent leak-down into the intake manifold.
This is a service replacement Quadrajet Carburetor that will work and fit on your Pontiac
Numbers matching Quadrajets for these applications are getting harder to find in any condition (un-restored/restored) and can go for thousands of Dollars
If you are looking for that OEM look under your hood, a great quality Quadrajet that doesn't require you to modify gas line, linkages, air filter, intake manifold, etc..., and want to save a lot of money, don't miss this great opportunity.
THE NUMBERS BELOW ARE FOR REFERENCE ONLY:
IT REPLACES:
7040273
This is a service replacement carburetor built and calibrated to replace the part numbers listed above, these numbers are for reference only and are not stamped on this carburetor
This is not a numbers matching Carburetor
Also available with electric choke upgrade,






